PARCO grease separator product line was developed to complement PURECO’s separator family. PARCO was licensed by ÉME (based on EN 1825) and certified by Water Management. Wastewater containing a considerable proportion of grease in a non-separable form (i.e. emulsified) from applications such as dairy, cheese making and fish processing, or from distribution points having only dish washing facilities, or from „wet waste compactors”, will only be effectively treated in grease separators under certain conditions.
The wastewater may require further treatment. Applications where the discharged wastewater contains solids that are quick to purify (e.g. the fish industry) do not require a sludge trap but the grease separator shall be fitted with a strainer or screening device fitted on the inlet side to retain coarse solids. Any retained solids should be removed and the separator thoroughly flushed with clean water before operational intervals to prevent putrefaction.
- Sediment and grease separators with plastic tanks
- according to the MSZ EN 1825 standard
- Sump and grease separation in equipment without chemicals added
- only by gravitations phase separation
- wherever it is necessary to separate greases and oils of wastewater
Fields of application
- Restaurants
- Kitchens
- Meat processing works
- Food industry
Advantages of the product
- can be moved manually
- can be set up anywhere inside a building
- additional units simplify operation
- separate sludge trap is to capture the sediment-capable materials
- equipment is operated through manholes
- odor-proof covers can be installed
Technical data
- Smallest to largest PARCO 0,5P-8P:
- Capacity 1 l/s -8 l/s
- Length 650 mm-3000 mm
- Width 500 mm-1000 mm
- Height 500 mm-1250 mm
- Weight 15 kg-220 kg
Key benefits
- complies with all the relevant regulations
- easy to install
- physical phase separation
- it operates in a water filled state
- supernatants are retained due to the position of the drain pipe
